At Slant 3D we have been busy the past week aggregating 3D Printed designs and putting them into production to help as much as we can with the spreading coronavirus situation. We have optimized face shields, accessories and are working on masks. But we would like to provide some files for ventilator parts that may become necessary should the supply become short in your local area. We have also prepared them for production ourselves. Currently our facility is making about 1000 face shields per day. But we are working to spin up more production if the need arises. Ventilator Venturi ValveThese valves were practically the first necessity in Italy to be 3D printed. This new design is optimized for additive manufacturing and is fully open source. We are prepared to produce about 250-500 of these parts per day, if necessary. But they are designed to be disposable. Please reach out if you have a need for these parts. ![]()
Ventilator SplitterThis design was made by Hargurdeep Singh. The design is well adapted for FDM 3D Printing and is intended to split a ventilator among multiple patients. We have not verified this design. It is meant to be used as last resort. If you have a need for this part please reach out to us. ![]()
Ventilator Valve for Snorkeling MaskAnother creation from Italy this valve was made by Isinnova to convert normal full-face snorkeling masks into ventilators. The file is simple to print, but may require heating to be fitted to equipment. This can be done with a hair dryer or hot water. We have also prepared this part for production should the need arise. ![]()
2 Comments
|
Featured Posts
Categories
All
Archives
December 2020
|