|
3D Printing has an incredible ability to not require certain geometries. But if you are designing a piece from scratch for 3D printing, there are several rules-of-thumb to follow in order to create a parts that address the advantages and disadvantages of 3D printing. The graphic below is a good start when designing for 3D printing. If you have any questions or would like to see if your part should be 3D printed. Submit it for a quote. We will determine cost and give you a full design evaluation.  The original source of this graphic can be viewed here
1 Comment
2/6/2018 03:23:14 pm
3D printing is slowly making its way to stardom. There are a lot of products that can be done with 3D printing. My kids want to do something like this in the future. Designs for 3D printing seems a lot more complex than I thought. I do hope there will be more lessons about this in the future. I just heard that there are possible things that can be done with these. 3D printing has a lot more to offer. Leave a Reply. |
Featured Posts
Categories
All
Archives
July 2021
|
RSS Feed
Services |
Company |
|