Slant 3D Production 3D Printing Service
  • Production 3D Printing Quote
  • Products and Services
    • Production 3D Printing >
      • How to Use Production 3D Printing
      • 3D Printed Part Properties
      • Technology
      • 3D Design and Engineering
      • Product Fulfillment
    • Angled.io
    • Twist Prototypes
    • Mason 3D Printer >
      • Mason 3D Printer
      • Mason General Resources
      • Supply Store
    • 3D Printed PPE
  • About
    • Past Clients
    • Contact
    • Careers
  • Blog

3D Printed PPE

Face Shield Orders Shipping within 1-2 Business Days

3D Printed Face Shields

We have created a line of 3D Printed Face Shields and their individual parts. They are compatible withe Prusa RC2 3D printed face shield design. So headbands and visors can be swapped between our designs and Prusa's

Adult Full 3D Printed Face Shield

$9.00

Reusable Face Shield Sized for an Adult Head. (Headband adjusts to fit most heads)


This emergency face shield is designed with a primary 3D Printed PLA headband and single PET sheet face. (Colors may vary from the displayed photo based on materials available at time of order.)


The headband grasps the users head and will remain in place even with vigorous shaking.


The headband is manufactured with FDM 3D printing. It is not considered reusable. However you can purchase replacement headbands here. The PET sheet can then be sterilized and used with a new headband.


Face Shields are considered a Class 1 Medical device and are not regulated by the FDA.


Items are shipped flat and will require assembly upon arrival. Process generally takes 1-2 minutes.


  1. Remove the Protective layer on the clear visor (The visors are lasercut the layer prevent contamination and staining
  2. Attach the visor to the headband via the 4 bumps along the rim of the headband.
  3. Optional: Sterilize with a simple antibacterial wipedown.
Shop

100x Full 3D Printed Face Shield

$850.00

This emergency face shield is designed with a primary 3D Printed PLA headband and single PET sheet face. (Colors may vary from the displayed photo based on materials available at time of order.)


The headband grasps the users head and will remain in place even with vigorous shaking.


The headband is manufactured with FDM 3D printing. It is not considered reusable. However you can purchase replacement headbands here. The PET sheet can then be sterilized and used with a new headband.


Face Shields are considered a Class 1 Medical device and are not regulated by the FDA.


We are currently producing 1000 face shields per day to help protect healthcare workers.


Items are shipped flat and will require assembly upon arrival. Process generally takes 1-2 minutes.


  1. Remove the Protective layer on the clear visor (The visors are lasercut the layer prevent contamination and staining
  2. Attach the visor to the headband via the 4 bumps along the rim of the headband.
  3. Optional: Sterilize with a simple antibacterial wipedown.
Shop

Face Shield Replacement Headbands.

$4.00

(DOES NOT INCLUDE CLEAR VISOR. ONLY THE HEADBAND. CHECK HERE FOR VISOR+HEADBAND)


And Updated Version of the Slant 3D Headband for a 3D Printed Face Shield. This design is compatible with the Prusa RC2 design visor.


We are working on locating resources for cutting the transparent shield itself. This design does not require fastening bands. But Velcro can be adhered to the inside of the straps to secure it even more firmly


Colors will vary

Shop

Spare FaceShield Visor

$4.00

Replacement Clear Visor for use with Slant 3D Headbands.


Optically clear. Shipped with protective layer which will require removal on arrival.


This Item does not include the colored a headband. This is only the clear PET visor. If you need full face shields order them here.

Shop

Other 3D Printed Covid-19 Accessories

Covid-19 seems to be spread most easily through direct surface contact. So we have created and put into production a number of accessories that can be used to limit contact with potentially infected surfaces such as door handles.

We have also added ear relief straps for N95 masks. As well as affordable US-made 3D Printer filament to allow other makers to produce PPE in their area.

100 Face Mask Ear Relief Band Connector

$85.00

These band connectors hold the elastic bands so that your ears don't have to. These relieve the pain from hours of face mask rubber bands sinking into the back of your ears.


3D Printed from PLA

Shop

25x Slant 3D Hands Free Door Opener - Square Handle

$75.00

25 Door Handle Openers.


Reduce contact with door handles by opening them with your elbow.

Designed By Slant 3D. Printed by Slant 3D.


Contact us withlarger bulk needs

Shop

Hands Free Handle Grabber Keychain

$1.00

A Simple Keychain to let you manipulate handles and switches without having to touch them


Contact us for bulk orders.

Shop

1.75 Transparent Pro PLA Filament

$27.99 $25.99

There is a dramatic shortage of 3D Printing filament due to Covid-19. Therefore we are releasing filament that we traditionally produce for use inside of our 3D Printer farms.


Material: Natureworks Ingeo 850 - ProPLA (Capable of being annealed)

Diameter: 1.75mm +/- .04 mm

Size: 1 KG Spool

Color: Transparent (Perfectly Clear with no yellowing)

Print Temp: 215-225

Print Bed Temp: 60-70

Print Speed: 35-60mm/s


Manufactured in the USA. Free Shipping


This high quality PLA is the latest generation of polymers created by Natureworks. Slant 3D has been using literally tons of this material in house to produce hundreds of thousands of parts for clients and medical relief devices since in the outbreak of coronavirus.


These are limited batches created solely to stem the supply shortage brought on by covid-19 as affordably as possible. We hope that this material will be used in the production of faceshields and other PPE.

Shop

10x Materialize Hands Free Round Handle Door Opener

$70.00

10 Elbow Door Handle Openers.


Reduce contact with door handles. Designed By Materialize. Printed by Slant 3D. Contact us with bulk needs.


Does not include the M4 screws and nuts needed for assembly. Only the 3D Printed parts. Requires two M4 x 12 screws and two M4 x 16 screws with nuts.


https://www.materialise.com/en/hands-free-door-opener

Shop

3D Printed Emergency Ventilator Parts

These pieces are not FDA approved and are intended to only be used in an sbsolute emergency. We will provide them in that situation only. If you have a need for 3D Printed ventilator parts please complete the form below.

3D Printed PPE Supply Requests

If you have a need for 3D printable PPE that is not yet available. Please reach out with the form below.  And we will be in contact to try and help you get what you need. 
Submit

Services

Production 3D Printing
Fulfillment
CAD Design

Company

About
The Company
Technology
Past Clients
​

Support

Contact
Get a Quote
​


© COPYRIGHT 2018. ALL RIGHTS RESERVED.
  • Production 3D Printing Quote
  • Products and Services
    • Production 3D Printing >
      • How to Use Production 3D Printing
      • 3D Printed Part Properties
      • Technology
      • 3D Design and Engineering
      • Product Fulfillment
    • Angled.io
    • Twist Prototypes
    • Mason 3D Printer >
      • Mason 3D Printer
      • Mason General Resources
      • Supply Store
    • 3D Printed PPE
  • About
    • Past Clients
    • Contact
    • Careers
  • Blog